KEEP HOLIDAY LIGHT DECORATING SAFE, ENERGY-EFFICIENT, FESTIVE AND FUNPeople love lighting up their homes for the holidays – whether it’s inside your home along the fireplace or on your front lawn decorating your trees and bushes. What most people don’t love is the increase in their electricity bill after all the holiday cheer and lights are gone.
Here are some ways to be energy-efficient this holiday season:
- Make smart lighting choices. LED holiday lights are the way to go! They use up to 80% less energy and are brighter and safer since they are much cooler than incandescent lights. They’re easier to install—up to 24 strings of LEDs can be connected end-to-end without overloading a wall socket. They last ten times longer and have no filaments or glass to break.
- Limit energy use. Set timers for lights to automatically turn on when it gets dark and off in the middle of the night. You can save more by keeping light displays on only 8 hours of the evening or less (when you can see them).
- Get reflective. Shiny ornaments, tinsel and mirrors can multiply the effects of your lighting without using more energy. Be sure to keep tinsel away from pets, though. Reflective ornaments and tinsel are just as bright at night, so getting creative with your lighting display can multiply your resources for shine. Don't forget the ribbons, wreaths, garland and reflective menorahs for electricity- free, age-old traditions that bring holiday cheer.
Be sure to stay safe over the holidays. Here are some great tips to keep you and your loved ones safe.
- Limit the connection of light strands. Avoid overloading extension cords and wall sockets by following the manufacturer’s limits for the number of light strings that can be safely connected.
- Hang lighting safely. Make sure that no cords will be pinched by furniture or placed under rugs, furniture or other appliances. If covered, cords can overheat or become frayed, increasing the risk of fire. Replace faulty lights instead of trying to repair them.
- Avoid electric hazards outdoors. Before climbing ladders to string outdoor lights, check for overhead power lines on your roof or attached to your home. Always keep at least 10 feet away from overhead lines. Never place yourself or any object, such as a string of lights, in a position that risks contact with a power line—the result can be fatal.
- Use GFCI outlets. Outdoor electric lights and decorations should be plugged into circuits protected by ground fault circuit interrupters (GFCIs). How do you know if it’s a GFCI? Look for the “test” and “reset” buttons. If circuits are not GFCI-protected, portable outdoor GFCIs can be purchased.
- Check your environment outdoors. Before stringing lights on outdoor trees, make sure tree limbs haven’t grown into or near power lines. Branches, entire trees and even the ground adjacent to a tree can become energized when trees contact power lines.
- Put your tree in a safe location. Keep your holiday tree away from heat sources such as a fireplace or heat vent. The heat will dry out the tree, making it more susceptible to fires caused by heat, flame or sparks.
- Check condition of lights. Inspect light strands for cracked or broken plugs, frayed insulation or bare wires. Worn cords can cause fires, so discard damaged sets of lights.
- Read the labels. Be sure to check each product label to see whether the lights are intended for indoor or outdoor use. Make sure lights have a tag indicating they have been evaluated by a recognized testing laboratory.
For more winter energy-saving and safety tips, visit sdge.com/winter.